|
AMERICAN STYLE 30-DEGREE DIES |
|
LA-1 Die |
|
 |
These punches and
dies are the most universal type press brake dies. They are ideal
for the first step in a hemming operation furthermore they can be
used to air bend any angle greater then 30-degrees. Finished theses
dies with a flat top gives greater strength to the die and allows
for additional surface hardening when forming abrasive materials
like rod or wire.
- Punches and dies are available from stock.
- Used to form first operation of a hem.
- Can be used for air bending angles greater than 30-degrees.
- Can be sectionalized to fit your needs.
- Dies are quick change.
|
|
PUNCH |
|
|
UA-1 Punch |
|
|
LA-2 Die |
|
 |
These punches and
dies are the most universal type press brake dies. They are ideal
for the first step in a hemming operation furthermore they can be
used to air bend any angle greater then 30-degrees. Finished theses
dies with a flat top gives greater strength to the die and allows
for additional surface hardening when forming abrasive materials
like rod or wire.
- Punches and dies are available from stock.
- Used to form first operation of a hem.
- Can be used for air bending angles greater than 30-degrees.
- Can be sectionalized to fit your needs.
- Dies are quick change.
|
|
PUNCH |
|
|
UA-1 Punch |
|
|
LA-3 Die |
|
 |
These punches and
dies are the most universal type press brake dies. They are ideal
for the first step in a hemming operation furthermore they can be
used to air bend any angle greater then 30-degrees. Finished theses
dies with a flat top gives greater strength to the die and allows
for additional surface hardening when forming abrasive materials
like rod or wire.
- Punches and dies are available from stock.
- Used to form first operation of a hem.
- Can be used for air bending angles greater than 30-degrees.
- Can be sectionalized to fit your needs.
- Dies are quick change.
|
|
PUNCH |
|
|
UA-1 Punch |
|
|
LA-4 Die |
|
 |
These punches and
dies are the most universal type press brake dies. They are ideal
for the first step in a hemming operation furthermore they can be
used to air bend any angle greater then 30-degrees. Finished theses
dies with a flat top gives greater strength to the die and allows
for additional surface hardening when forming abrasive materials
like rod or wire.
- Punches and dies are available from stock.
- Used to form first operation of a hem.
- Can be used for air bending angles greater than 30-degrees.
- Can be sectionalized to fit your needs.
- Dies are quick change.
|
|
PUNCH |
|
|
UA-2 Punch |
|
|
LA-5 Die |
|
 |
These punches and
dies are the most universal type press brake dies. They are ideal
for the first step in a hemming operation furthermore they can be
used to air bend any angle greater then 30-degrees. Finished theses
dies with a flat top gives greater strength to the die and allows
for additional surface hardening when forming abrasive materials
like rod or wire.
- Punches and dies are available from stock.
- Used to form first operation of a hem.
- Can be used for air bending angles greater than 30-degrees.
- Can be sectionalized to fit your needs.
- Dies are quick change.
|
|
PUNCHES |
|
|
UA-3 Punch |
|
|
LA-6 Die |
|
 |
These punches and
dies are the most universal type press brake dies. They are ideal
for the first step in a hemming operation furthermore they can be
used to air bend any angle greater then 30-degrees. Finished theses
dies with a flat top gives greater strength to the die and allows
for additional surface hardening when forming abrasive materials
like rod or wire.
- Punches and dies are available from stock.
- Used to form first operation of a hem.
- Can be used for air bending angles greater than 30-degrees.
- Can be sectionalized to fit your needs.
- Dies are quick change.
|
|
PUNCH |
|
|
UA-4 Punch |
|
|
LA-7 Die |
|
 |
These punches and
dies are the most universal type press brake dies. They are ideal
for the first step in a hemming operation furthermore they can be
used to air bend any angle greater then 30-degrees. Finished theses
dies with a flat top gives greater strength to the die and allows
for additional surface hardening when forming abrasive materials
like rod or wire.
- Punches and dies are available from stock.
- Used to form first operation of a hem.
- Can be used for air bending angles greater than 30-degrees.
- Can be sectionalized to fit your needs.
- Dies are quick change.
|
|
PUNCH |
|
|
UA-4 Punch |
|
|
LA-8 Die |
|
 |
These punches and
dies are the most universal type press brake dies. They are ideal
for the first step in a hemming operation furthermore they can be
used to air bend any angle greater then 30-degrees. Finished theses
dies with a flat top gives greater strength to the die and allows
for additional surface hardening when forming abrasive materials
like rod or wire.
- Punches and dies are available from stock.
- Used to form first operation of a hem.
- Can be used for air bending angles greater than 30-degrees.
- Can be sectionalized to fit your needs.
- Dies are quick change.
|
|
PUNCH |
|
|
UA-5 Punch |
|
|
|
|
|
