90 Punches

90 Dies

Gooseneck Punches

30 Punches

30 Dies

Flattening Dies

Offset Dies

Hemming Dies

Radius Dies

Channel Dies

Wiping Dies

Tipped Angle Dies

Rocker Dies

Corrugation Dies

Standing Seam Dies

Curling Dies

Box Forming Dies

3-Way / 4-Way Dies

Adjustable Vee Dies

Ram Adpaters

Die Holders

 
 

 

AMERICAN STYLE 90-DEGREE DIES

L-2 Die

These punches and dies are the most widely used to form 90-degree and greater bends. By adjusting the ram, the depth of punch travel can be regulated to produce the desired angle of bend. The U-2 punch is used to form longer return bends; in addition the width of the U-2 punch is narrowed to form a short flange.
  • Punches and dies are available from stock.
  • Can be used for air bending or bottom bending.
  • Can be modified to a special angle or radius.
  • Can be sectionalized to fit your needs.
  • Dies are quick change.

PUNCHES

 

U-2 Punch

U-3 Punch

G-1 Punch

L-3 Die

These punches and dies are the most widely used to form 90-degree and greater bends. By adjusting the ram, the depth of punch travel can be regulated to produce the desired angle of bend. The U-2 punch is used to form longer return bends; in addition the width of the U-2 punch is narrowed to form a short flange.
  • Punches and dies are available from stock.
  • Can be used for air bending or bottom bending.
  • Can be modified to a special angle or radius.
  • Can be sectionalized to fit your needs.
  • Dies are quick change.

PUNCHES

 
U-2 Punch U-3 Punch

G-2 Punch

L-4 Die

These punches and dies are the most widely used to form 90-degree and greater bends. By adjusting the ram, the depth of punch travel can be regulated to produce the desired angle of bend. The U-2 punch is used to form longer return bends; in addition the width of the U-2 punch is narrowed to form a short flange.
  • Punches and dies are available from stock.
  • Can be used for air bending or bottom bending.
  • Can be modified to a special angle or radius.
  • Can be sectionalized to fit your needs.
  • Dies are quick change.

PUNCHES

 
U-2 Punch U-3 Punch

G-7 Punch

L-5 Die

These punches and dies are the most widely used to form 90-degree and greater bends. By adjusting the ram, the depth of punch travel can be regulated to produce the desired angle of bend. The U-2 punch is used to form longer return bends; in addition the width of the U-2 punch is narrowed to form a short flange.
  • Punches and dies are available from stock.
  • Can be used for air bending or bottom bending.
  • Can be modified to a special angle or radius.
  • Can be sectionalized to fit your needs.
  • Dies are quick change.

PUNCHES

 
U-2 Punch U-3 Punch

G-3 Punch

L-6 Die

These punches and dies are the most widely used to form 90-degree and greater bends. By adjusting the ram, the depth of punch travel can be regulated to produce the desired angle of bend.
  • Punches and dies are available from stock.
  • Can be used for air bending or bottom bending.
  • Can be modified to a special angle or radius.
  • Can be sectionalized to fit your needs.
  • Dies are quick change.

PUNCHES

 
U-3 Punch G-4 Punch

G-8 Punch

L-7 Die

These punches and dies are the most widely used to form 90-degree and greater bends. By adjusting the ram, the depth of punch travel can be regulated to produce the desired angle of bend.
  • Punches and dies are available from stock.
  • Can be used for air bending or bottom bending.
  • Can be modified to a special angle or radius.
  • Can be sectionalized to fit your needs.
  • Dies are quick change.

PUNCHES

 
U-3 Punch G-4 Punch

G-8 Punch

L-8 Die

These punches and dies are the most widely used to form 90-degree and greater bends. By adjusting the ram, the depth of punch travel can be regulated to produce the desired angle of bend.
  • Punches and dies are available from stock.
  • Can be used for air bending or bottom bending.
  • Can be modified to a special angle or radius.
  • Can be sectionalized to fit your needs.
  • Dies are quick change.

PUNCHES

 
U-3 Punch G-4 Punch

G-8 Punch

L-9 Die

These punches and dies are the most widely used to form 90-degree and greater bends. By adjusting the ram, the depth of punch travel can be regulated to produce the desired angle of bend.
  • Punches and dies are available from stock.
  • Can be used for air bending or bottom bending.
  • Can be modified to a special angle or radius.
  • Can be sectionalized to fit your needs.
  • Dies are quick change.

PUNCHES

 
U-4 Punch G-4 Punch

G-8 Punch

L-10 Die

These punches and dies are used for air bending heavier gauges of material. Air bending will minimize the press brake load and material fracture.
  • Punches and dies are available from stock.
  • Can be modified to a special angle or radius.
  • Can be sectionalized to fit your needs.
  • Dies are quick change.

PUNCHES

 
U-5 Punch G-5 Punch

G-9 Punch

L-11 Die

These punches and dies are used for air bending heavier gauges of material. Air bending will minimize the press brake load and material fracture.
  • Punches and dies are available from stock.
  • Can be modified to a special angle or radius.
  • Can be sectionalized to fit your needs.
  • Dies are quick change.

 

PUNCHES

 
U-5 Punch G-6 Punch

G-9 Punch

L-12 Die

These punches and dies are used for air bending heavier gauges of material. Air bending will minimize the press brake load and material fracture.
  • Punches and dies are available from stock.
  • Can be modified to a special angle or radius.
  • Can be sectionalized to fit your needs.
  • Dies are quick change.
 

PUNCHES

 
U-5 Punch G-9 Punch

L-13 Die

These punches and dies are used for air bending heavier gauges of material. Air bending will minimize the press brake load and material fracture.
  • Punches and dies are available from stock.
  • Can be modified to a special angle or radius.
  • Can be sectionalized to fit your needs.
  • Dies are quick change.
 

PUNCH

 
U-6 Punch

L-14 Die

These punches and dies are used for air bending heavier gauges of material. Air bending will minimize the press brake load and material fracture.
  • Punches and dies are available from stock.
  • Can be modified to a special angle or radius.
  • Can be sectionalized to fit your needs.
  • Dies are quick change.
 

PUNCH

 
U-6 Punch

L-15 Die

These punches and dies are used for air bending heavier gauges of material. Air bending will minimize the press brake load and material fracture.
  • Punches and dies are available from stock.
  • Can be modified to a special angle or radius.
  • Can be sectionalized to fit your needs.
  • Dies are quick change.
 

PUNCH

 
U-7 Punch