|
AMERICAN STYLE 90-DEGREE PUNCHES |
|
U-2 Punch |
|
 |
These punches and dies are the
most widely used to form 90-degree and greater bends. By adjusting
the ram, the depth of punch travel can be regulated to produce the
desired angle of bend. The U-2 punch is used to form longer return
bends; in addition the width of the U-2 punch is narrowed to form a
short flange.
- Punches and dies are available from stock.
- Can be used for air bending or bottom bending.
- Can be modified to a special angle or radius.
- Can be sectionalized to fit your needs.
- Punches are quick change.
|
|
DIES |
|
|
L-2 Die |
L-3 Die |
L-4 Die |
L-5 Die
|
|
|
U-3 Punch |
|
 |
These punches and dies are the
most widely used to form 90-degree and greater bends. By adjusting
the ram, the depth of punch travel can be regulated to produce the
desired angle of bend. The U-2 punch is used to form longer return
bends; in addition the width of the U-2 punch is narrowed to form a
short flange.
- Punches and dies are available from stock.
- Can be used for air bending or bottom bending.
- Can be modified to a special angle or radius.
- Can be sectionalized to fit your needs.
- Punches are quick change.
|
|
DIES |
|
|
L-2 Die
|
L-3 Die
|
L-4 Die |
L-5 Die
|
L-6 Die
|
L-7 Die
|
L-8 Die
|
|
|
U-4 Punch |
|
 |
These punches and dies are the
most widely used to form 90-degree and greater bends. By adjusting
the ram, the depth of punch travel can be regulated to produce the
desired angle of bend. The U-2 punch is used to form longer return
bends; in addition the width of the U-2 punch is narrowed to form a
short flange.
- Punches and dies are available from stock.
- Can be used for air bending or bottom bending.
- Can be modified to a special angle or radius.
- Can be sectionalized to fit your needs.
- Punches are quick change.
|
|
DIE |
|
|
L-9 Die |
|
|
U-5 Punch |
|
 |
These punches and dies are the
most widely used to form 90-degree and greater bends. By adjusting
the ram, the depth of punch travel can be regulated to produce the
desired angle of bend. The U-2 punch is used to form longer return
bends; in addition the width of the U-2 punch is narrowed to form a
short flange.
- Punches and dies are available from stock.
- Can be used for air bending or bottom bending.
- Can be modified to a special angle or radius.
- Can be sectionalized to fit your needs.
- Punches are quick change.
|
|
DIES |
|
|
L-10 Die
|
L-11 Die |
L-12 Die
|
|
|
U-6 Punch |
|
 |
These punches and
dies are the most widely used to form 90-degree and greater bends.
By adjusting the ram, the depth of punch travel can be regulated to
produce the desired angle of bend.
- Punches and dies are available from stock.
- Can be used for air bending or bottom bending.
- Can be modified to a special angle or radius.
- Can be sectionalized to fit your needs.
- Punches are quick change.
|
|
DIES |
|
|
L-13 Die
|
L-14 Die
|
|
|
L-7 Die |
|
 |
These punches and
dies are the most widely used to form 90-degree and greater bends.
By adjusting the ram, the depth of punch travel can be regulated to
produce the desired angle of bend.
- Punches and dies are available from stock.
- Can be used for air bending or bottom bending.
- Can be modified to a special angle or radius.
- Can be sectionalized to fit your needs.
- Punches are quick change.
|
|
DIE |
|
|
L-15 Die
|
|
|
|
|
|
