|
AMERICAN STYLE CORRUGATION DIE SETS |
 |
C-1 Corrugation Die Set |
VIEW DETAILS |
The C-1 die set is used to form a shallow
open angle hat channel. The maximum depth cannot exceed three times
the material thickness. |
|
 |
C-2 Corrugation Die Set |
VIEW DETAILS |
The C-2 die set is used to form a radius rib
in a single stroke. Over bend can be built into the die set to
compensate for spring back. |
|
 |
C-3 Corrugation Die Set |
VIEW DETAILS |
The C-3 die set is used to form a
vee rib in a single stroke. For heavy gauge material the die set can
be relieved to reduce tonnage. The part will be flat after forming
but the angel may vary over the length of the part.
|
|
 |
C-4 Corrugation Die Set |
VIEW DETAILS |
The C-4 die set is used to form three bends
in a single stroke to stiffen a sheet of material. The C-4 is
commonly used to form a door jam. |
|
 |
C-5 Corrugation Die Set |
VIEW DETAILS |
The C-5 die set is used to form continuous
corrugations in a sheet. After the first operation the spring loaded
pressure pad locates the sheet and becomes self-gauging.
|
|
 |
C-6 Corrugation Die Set |
VIEW DETAILS |
The C-6 die set is used to form continuous
corrugations in a sheet. After the first operation the spring loaded
pressure pad locates the sheet and becomes self-gauging. The maximum
depth cannot exceed three times the material thickness. |
|
|
|
