90 Punches

90 Dies

Gooseneck Punches

30 Punches

30 Dies

Flattening Dies

Offset Dies

Hemming Dies

Radius Dies

Channel Dies

Wiping Dies

Tipped Angle Dies

Rocker Dies

Corrugation Dies

Standing Seam Dies

Curling Dies

Box Forming Dies

3-Way / 4-Way Dies

Adjustable Vee Dies

Ram Adpaters

Die Holders

 
 

 

AMERICAN STYLE CURLING DIE SETS
CU-1 / CU-2 Curling Die Set

VIEW DETAILS

The CU-1 and CU-2 curling die sets when used in combination with each other form the tightest, most accurate off-center curl available in two press strokes. For progressive forming the die sets can be made with matched shut heights  
CU-1 / CU-3 Curling Die Set

VIEW DETAILS

The CU-1 and CU-3 curling die sets form an off center curl in three stokes or an on-center curl in three strokes. To maintain the diameter of the curl the part should be closed over a mandrel in the third operation.

 

CU-4 Curling Die Set

VIEW DETAILS

The CU-4 curling die set forms a complete off-center curl in three operations. Whip-up is kept to minimum because of the small angle involved as the material travels through the first two operations. When forming heavier materials, a leader can be added to the backside of the punch which keeps the punch and die form spreading.

 

CU-5 Curling Die Set

VIEW DETAILS

The CU-5 curling die set forms a complete off-center curl in three operations or an on-center curl in four operations. To maintain the diameter of the curl the part should be closed over a mandrel in the third operation. A leader is added to the backside of the punch which keeps the punch and die form spreading.

 

CU-6 / CU-7 Curling Die Set

VIEW DETAILS

The CU-6 and CU-7 curling die sets are useful in forming larger diameter curls in three stokes. Three operations used in conjunction with both die sets will produce a closed curl, while an open curl up to 180 can be formed with just CU-6. Both dies may be placed next to each other for progressive forming.