|
AMERICAN STYLE OFFSET DIE SETS |
 |
O-10 Acute Offset Forming Die Set |
VIEW DETAILS |
The O-10 die set is used to form an
acute-angle offset in one stroke. Whip-up should be a consideration
so the sheet does not hit the ram of the press brake. |
|
 |
O-11 Offset Forming Die Set |
VIEW DETAILS |
The O-11 die set is used to form
a material thickness offset. In addition large radii and additional
clearance help keep tonnage requirements to a minimum. |
|
 |
O-12 Offset Forming Die Set |
VIEW DETAILS |
The O-12 die set is used to
bottom bend special open angle offsets. |
|
 |
O-13 Offset Forming Die Set |
VIEW DETAILS |
The O-13 die set is used to air
bend a special offset when tonnage capacity is a problem. Air
forming, however, will not give the accuracy of shape that comes
from bottoming dies. |
|
 |
O-14 Offset Forming Die Set |
VIEW DETAILS |
The O-14 die set is used when the
flange is considerable shorter than the offset being formed. The
forming angle is tipped to reduce size of vee opening and prevent
bowing of offset web. The gauging is more accurate with this type of
die set rather than the general purpose offset dies. |
|
 |
O-15 Offset Forming Die Set |
VIEW DETAILS |
The O-15 die set is used to form
a material thickness offset. The leader on the back side of the die
limits the distance of the offset form the edge of the sheet;
however the leader is needed to prevent spreading and to keep the
dies in line. |
|
 |
O-16 Offset Forming Die Set |
VIEW DETAILS |
The O-16 die set is used to form a material
thickness offset in heavy gauge material. The offset will be open
angle because the outside radii are too large for the depth of the
offset. |
|
|
|
